Changelog
V1.13.0 2020-04-14
- auto-detect hardware (STICK vs. WIFI) by hardware pin
- use config web page for more values (userdefines.h has the defaults), #140
- try both adresses of BME280
- LoRa payload changes, e.g. to fulfill ‘TTN Fair Access Policy’
- send additional data to servers
- send to MADAVI in one single request both geiger and thp data
- new logging with DEFAULT_LOG_LEVEL configuration
- integrated travis-ci:
- for compile checks (platformio, wifi and stick build)
- for style checks (using the “astyle” CPP checker)
- source: modularization, cleanups, less globals, …
(quite huge internal changes, please help testing!)
- building:
- platformio-based build: suppress lmic_project_config.h usage
- arduino-ide-based build: you still need to edit that file
- use bump2version tool for project version bumps, #169
- docs:
- added upgrade hints for 1.13 in README on github
- https://multigeiger.readthedocs.io/ == the beginning of
new (sphinx / reST-markup based) online docs, #163
- add a basic, short README in English (also for online docs)
- include infos about project name, #121
- moved changelog.md to docs/source/changes.rst
- updated/fixed development docs, #46
- update docs about new 5V power supply / cabling, #122
- description of LoRa Payload updated
- other docs improvements / fixes
V1.12.0 2020-01-18
- simple OTA (Over-The-Air) updates via web browser based upload, #120
- use less charge pulses in loop() for timing, more in setup() for initial charging, #134
- output error msg on Serial if HV charging fails
- tag log output with “GEIGER: “, #85
- add TUBE_UNKNOWN 0 to have a specific value for experimenting
- adapted platformio.ini to pull all dependencies
- send CR and LF on serial
- changed default tube from sbm-20 to si22g
- semantic versioning, version numbers now like x.y.z
- changed building of revString and lora_version
- docs updated / improved
- explain SBM-19/SBM-20 conversion factor
- removed IotWebconf bundled&patched code, used as a lib now.
V1.11.1 2019-12-16 rxf
- change luftdaten.info to sensor.community
V1.11.0 2019-12-16 rxf
- defaults in userdefines-example.h changed
- Software version for LoRa now 2 Bytes
- Display start screen for Wireless stick fixed
- changed to semantic versioning
V1.10 2019-12-13
- conversion factor for Si22G tube fixed
- char variables changed to int
- isr routines shielded with portMUX
- debug serial out formatting improved
- sequence of counting and dispaying and hv charging improved
- speaker and led tick fixed
- many calls to millis() consolidated
V1.9 2019-11-12
- structure for different counter tubes
- LoRa payload changed again
- hv pulse every second
- calculate and display cpm value every 10 seconds
- fixed div by 0 if there’s no tube
- Readme corrected
V1.8 2019-11-04
- indentation/spacing, refactor OLED functions, fix conversion factor
- MEASUREMENT_INTERVAL 150sec
- changed LoRa payload
V1.7 2019-10-21
- PINs rearranged, so we can use new Wifi-Kit-32 and WiFi Stick Light
- Hardware-Layout V1.4 and up
- use switch for speaker tick and display off
V1.61 2019-09-30
- default measuring interval is now 2.5min
V1.6 2019-09-13
- some rearrangement of files
- userdefine.h for user changable #defines
- test with dip-switch (needs pullup resistors!)
- Hardware layout V1.3 and lower - OLD Wifi-Kit-32!
V1.5 2019-09-11
- added BME280 (uses same I2C as display)
- Support for display on Wireless Stick
- For LoRa-Devices added LoRa functionality
V1.4 2019-09-03
- default configuration with measurement interval of 10min
V1.3 2019-09-03
- building of ESP-ID out of MAC address is now identical to ‘Feinstaubsensor’
V1.2 2019-09-02
- sending to madavi corrected
V1.1 2019-09-01
- Library IoTWebConfig changed -> function ‘setThingName’ added
- Move this (IoTWebConfig) library to source path
- building the SSID from the MAC corrected: first 3 Bytes of MAC build SSID
- LoRa autodetection removed
V1.0 2019-08-19 rxf
- added detection of LoRa device
- WiFiManager to enter WLAN data and other configs
- send to luftdaten.info every 2.5 min
V0.3 2019-05-12 jb
- added bug fix for the “Double-Trigger-Problem”. This was caused
by the rising edge falsly triggering an other pulse recording.
The Problem is that there is no Schmitt-Trigger available in the controller.
- simplified serial printing modes
- made seconds in Display as inverse to be able to separate it from minutes
- cleaned up the code
- Fixed overflow bug in Minute-Count+
V0.2 2019-04-26 jb
- added 1 Minute RS232 (USB) logging mode
V0.1 2019-03-25 jb
- first version for ESP32 board